Grizzly
G0946
Exact current U.S. G0946 six-inch benchtop jointer with a 1-1/2 HP, 120V single-phase 10A universal motor, belt drive, six-row spiral-type cutterhead, 12 two-sided HSS inserts measuring 14 x 14 x 2 mm, 11,000 RPM cutterhead speed, and a 30 x 6-1/4-inch cast-aluminum table.
Last reviewed: 2026-10-15
Configuration boundary
This exact record is for the current U.S. G0946 six-inch benchtop jointer with a 1-1/2 HP, 120V single-phase 10A universal motor, belt drive, six-row spiral-type cutterhead, and 12 two-sided 14 x 14 x 2 mm HSS inserts. The current V3.11.23 combined G0945/G0946/G0947 manual applies to machines manufactured since 12/23; owners must use the manufacture date on the machine ID label when matching manuals and revision-marked parts. G0945 straight-knife, G0947 eight-inch, G0986 ten-inch, and other jointer specifications and owner histories are not transferred to G0946. Official insert information conflicts: the current product specifications identify 12 HSS inserts, the manual parts list labels P0946160-2 as carbide, the product page calls the larger T32739 carbide insert compatible but says all 26 must be replaced despite listing 12 inserts, and the current parts page maps P0946160-2 to T32937, described there as a saw-blade/scoring product rather than an insert. These conflicts are preserved, and this record does not advise a full insert change without confirmation from Grizzly.
Evidence fields
Annual_maintenance_cost
Not yet verified
Evidence gap reviewed 2026-10-15; no verified value yet; research review due 2027-01-13.
Expected_service_life
Not yet verified
Evidence gap reviewed 2026-10-15; no verified value yet; research review due 2027-01-13.
Identity
Exact current U.S. G0946 six-inch benchtop jointer with a 1-1/2 HP, 120V single-phase 10A universal motor, belt drive, six-row spiral-type cutterhead, 12 two-sided HSS inserts measuring 14 x 14 x 2 mm, 11,000 RPM cutterhead speed, and a 30 x 6-1/4-inch cast-aluminum table.
Verified 2026-10-15; recheck every 180 days; stale after 2027-04-13.
Manufacturer source ↗Insert_compatibility
Official sources conflict: the current specifications identify 12 two-sided HSS inserts at 14 x 14 x 2 mm; the current manual parts list labels P0946160-2 as a carbide insert at that size; Grizzly names the larger 14.25 x 14.25 x 2 mm T32739 carbide insert as G0946-compatible but the product page says all 26 must be replaced despite listing 12 inserts; and the current parts page maps P0946160-2 to T32937, described there as a saw-blade/scoring product rather than an insert. Confirm a complete replacement set and procedure with Grizzly before purchase or installation.
Verified 2026-10-15; recheck every 90 days; stale after 2027-01-13.
Manufacturer source ↗Parts_availability
Partial: the exact-model catalog currently displays order controls for the table assembly, table, cutterhead assembly, and some smaller parts, while the manual separately identifies the Poly-V belt, 6201ZZ bearing, motor, carbon brushes, paddle switch, power cord, fence, guard, and other components. The T32739 replacement-insert page separately names G0946 compatibility. Not every listed component was independently confirmed orderable, and manufacture-date and insert-compatibility conflicts require confirmation.
Verified 2026-10-15; recheck every 90 days; stale after 2027-01-13.
Manufacturer source ↗Repair_manual
The owner manual covers maintenance, troubleshooting, insert rotation and replacement, table parallelism, fence positive-stop adjustment, belt tension and replacement, motor-brush replacement, wiring, and illustrated parts. It is substantial owner and service guidance, not a comprehensive internal repair manual for every subsystem or production revision.
Verified 2026-10-15; recheck every 180 days; stale after 2027-04-13.
Manufacturer source ↗Serviceability
Owners can rotate or replace individual cutterhead inserts, tension or replace the belt, replace motor brushes, and adjust table parallelism and fence stops using published procedures. Electrical diagnosis and work beyond the documented procedures should follow the manual and qualified-service boundaries.
Verified 2026-10-15; recheck every 180 days; stale after 2027-04-13.
Manufacturer source ↗Street_price
Not yet verified
Evidence gap reviewed 2026-10-15; no verified value yet; research review due 2026-11-14.
Warranty
One-year limited warranty for the original purchaser; proof of purchase is required, and consumables, misuse, abuse, negligence, accidents, repairs, improper wiring, alterations, and lack of maintenance are excluded.
Verified 2026-10-15; recheck every 180 days; stale after 2027-04-13.
Manufacturer source ↗